Black or white color tape anti-corrosive coating adhesive for water
steel pipe- XUNDA T 100 Inner wrap tape
Inner wrap tape T100 is engineered to achieve a complete bond
to the primed steel pipe, providing maximum handling and in-service
anti corrosion protection for the coating system.
Inner wrap tape T100 series is Cold applied tape coating system
for corrosion protection of Oil, Gas, Petrochemical, and Waste
Pipe can be buried, underground ,overhead ,onshore and offshore .
Excellent adhesion to primed steel pipe and self
long term corrosion protection , Resistant to UV
Worldwide reference lists. Established in-ground history
High chemical resistance under service temperature.
Outstanding electric property and permanent adhesion.
Cold applied, No release liner. Makes installation fast and easy.
Complies with ISO,DIN30672,AWWAC214 209,ASTMD1000.EN12068
Polyethylene backing+ Butyl rubber
12 rolls,6 rolls,4 rolls
Order Size for Black or white color tape anti-corrosive coating
adhesive for water steel pipe -
XUNDA T 100 Inner wrap tape :
20 mils (0.508 mm),25 mils (0.635 mm) 30mils(0.762mm)
Black (BLK), White (WHI), Blue (BLU),GREEN(GRN)
1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm),
Tape roll length
100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m)
Tape core diameter
1.5" (38 mm), 3" (75 mm)
TDS-Black or white color tape anti-corrosive coating adhesive for
water steel pipe
INNER-LAYER TAPE: XUNDA-T 100 Series
Total thickness(ASTM D 1000)
Backing thickness(ASTM D 1000)
Adhesive thickness(ASTM D 1000)
Elongation at Break(ASTM D 1000)
Tensile Strength(ASTM D 1000)
Yield Strength(ASTM D 1000)
Peel Adhesion to Primed Steel Pipe(ASTM D 1000)
Dielectric Strength(ASTM D 1000/D 149)
Cathodic Disbandment (ASTM G8)
0.24 in radius 6.4 mm
Volume Resistivity(ASTM D 257)
2.5 x 1012 ohm.m
Water Vapor Transmission Rate (ASTM F1249)
Water Absorption Rate(ASTM D 570)
Recommended Application Temperature
-5 to +60℃
Max Serve Temperature
-40 to + 85℃
Available Roll Size (width x length)
2" to 32" X 50’ to 800’
How to apply Black or white color tape anti-corrosive coating
adhesive for water steel pipe?
- The inner-layer tape shall be applied directly onto the prepared
Wrap tape application consists of hand application and machine
2 The tape applied temperature must be above 5 degrees, the coating
construction temperature shall be
more than -5 degrees as better.
3The tape shall be spirally applied ,minimum overlap shall not be
less than 50%.When applied to
spirally welded pipe , the direction of the tape spiral shall be
generally parallel to the weld spiral.
The minimum overlap shall not be less than 25 mm.
4)When a new row of tape is started, the ends shall be overlapped
at least 150 mm measured circumference.